slim-r-dual-pro_en.pdfSLIM-R-DUAL-PRO
Ceiling dual-tech motion detector with IR anti-masking (recessed)
SLIM-R-DUAL-PRO is an indoor motion detector from the SLIM LINE series, designed for recessed ceiling mounting. Is it an excellent solution for rooms with suspended ceilings. With its 360° detection coverage, it is well suited for monitoring shops, warehouses, and other spaces where a ceiling-mounted detector facing downward provides more effective area coverage than a wall-mounted detector.
This model is also available for surface mounting (SLIM-S-DUAL-PRO).
- compliant with the EN 50131 Grade 3 requirements
- motion detection using two sensors: passive infrared (PIR) and microwave (MW)
- active IR anti-masking compliant with EN 50131-2-4 for Grade 3 (delay: 1 s / 60 s)
- maximum detection area:
- ø 8 m / 50 m² – mounting height 2,4 m
- ø 9.3 m / 79 m² – mounting height 3,5 m
- digital motion detection algorithm for both sensors
- digital temperature compensation
- adjustable detection sensitivity for both sensors
- separate sensor testing feature
- digital filtering of signals received by the microwave sensor, ensuring immunity to interference caused by the power grid and discharge lamps
- selectable operating modes: basic, advanced, PIR, or MW
- detector operating parameter configuration:
- on-board buttons
- OPT-1 remote keyfob
- built-in EOL resistors: 1,1 kΩ, 4,7 kΩ, 5,6 kΩ
- LED indicator:
- selectable colour
- remote on/off control
- remote enable/disable of configuration mode
- supervision of the motion detection circuit
- 12 V DC power supply (±15%)
- power supply monitoring
- tamper protection against enclosure opening and detector tilt (optional, when tilt detection is enabled)
- installation in suspended ceiling
The actual appearance of the products may differ from the presented images. Product descriptions are provided in the web service for information purposes only.
Documentation
Technical Data
Supply voltage
12 V DC
Detected target velocity
0,2...3 m/s
Operating temperature range
-10°C...+55°C
Recommended mounting height
2,4…3,5 m
Standby mode current consumption
18 mA
Max. current consumption
50 mA
Weight
141 g
Maximum humidity
93±3
Dimensions
ø 130 x 42 mm
Environmental class according to EN50130-5
II
Alarm signaling time
2 s
Complied with standards
EN 50131-1, EN 50131-2-4, EN 50130-4, EN 50130-5
Microwave frequency
24,125 GHz
Security grade according to EN50131-2-4
Grade 3
Warm-up period
30 s
Alarm outputs (NC relay, resistive load)
40 mA / 24 V DC
Tamper outputs (NC relay, resistive load)
40 mA / 24 V DC
Anti-masking outputs (NC relay, resistive load)
40 mA / 24 V DC
Relay contact resistance (alarm output)
26 Ω
Relay contact resistance (tamper output)
26 Ω
Relay contact resistance (anti-masking output)
26 Ω
EOL resistors
2 x 1,1 / 2 x 4,7 / 2 x 5,6 kΩ